FS2002 PRO Sikorsky S-61N Panel Lynn Rogers July 2003
woodworth@alaskalife.net
Copyright 2003 All Rights Reserved
**************************
Logo and Trademark Notice:
**************************
ANY and ALL company Logo's and Trademarks presented are copyrighted by their respective owners. They are depicted here as artists presentation for illustrative purposes only.
*************************
THIS IS A FREEWARE PANEL
*************************
I designed this panel for use in the S-61N Helicopter designed by Dave Hardcastle.
This panel was made by Lynn Rogers. The panel was designed from a photograph of the Sikorsky S-61N intrument panel. This panel allows for forward viewing from the pilots viewing perspective. Certain gauges could not be duplicated at this time so I used a photo image in its place, other gauges come close or are actual replicas of the original ones. The panel was tested and appears to be working well in fs2002 Pro.
I have set the pilots view at 8.0 in the panel.cfg file, you can change this number to any value which fits your need for viewing. The higher the number the lower the nose of the helicopter becomes.This will allow you to continue flying without having to constantly change your setting with "shift+enter" or "shift+backspace".
Landing Gear Operation:
The landing gear is operated by the lever on the panel, your joystick, or keyboard command.
Gear Up:
Press which ever one you use then press the pause key, wait until the two middle red lights in the middle of the gear selector go out and press pause again. The top 4 blue lights will come on and the gear is now fully retracted and locked in place.
Gear Down:
Press the gear switch and then pause, wait until the two middle red lights go out and press the pause key again. The top blue and bottom yellow lights will come on and the gear is now fully extended and locked in place.
Shift+1 allows the Main panel
Shift+2 allows for Radio's
Shift+3 allows for GPS
Unzip the Gauges.zip to your FS2000/2002 gauges folder.
Unzip the S-61Npnl.zip to the panel folder of your helicopter.
*************************
Credits:
*************************
*Ike H Slack of Coyote Avionics Design
*Denis da Silva and Daniel da Silva for their permission to use their guages fron the AS350 / 355
*Thanks to all the designers of thier gauges, switch's, and panels. If I forgot to mention anyone in particular, it was not done on purpose, and I apologize in advance.
This Panel is FREEWARE, This means that you don't have to pay to use it! and DON'T make
MONEY with it. You are Free to use the modified gauges and the engine instruments in your aircraft panels.
No distribution is allowed on any disk or CD before obtaining the consent of the author/designer.
You may up-load this panel with any aircraft "ONLY" after giving the proper credit to the author(s) for the actual design work.
INSTALLING THESE FILES WILL NOT HARM YOUR COMPUTER, IF IN ANY CASE THEY DO I ACCEPT NO LIABILITY IF ANY DAMAGE MIGHT OCCUR TO YOUR SYSTEM.
